CUNY Academic Commons

Thanks for following up on this, Ray.

Increasing the number of workers seems reasonable to me, as long as Lihua doesn't have a problem with there being a bit more overhead in the form of PHP processes. To be clear, the change to the linked line will be:

$runner = Runner::instance( [ 'max_workers' => 8 ] );

Is that correct? In your GitHub comment, you describe this as a sort of "workaround", but IMO it's more accurate to say that an increased number of workers is a natural consequence of the very large number of sites and tasks on our installation. Even if we didn't have any problems with overlappingly-scheduled repeating events, we would still have a very large number of events that warrant more resources. Do you want to draft an email to Lihua about it?

It does seem like there's also a bug in Cavalcade here. The solution proposed in https://github.com/humanmade/Cavalcade-Runner/issues/51#issuecomment-489738426 seems correct to me. Calculating the new nextrun based on the current timestamp, rather than the old nextrun, feels like it would avoid a lot of problems. At the very least, the runner should be smart enough not to reschedule a recurring task if there are pending (and therefore duplicate) runs that are scheduled before the next time() + interval. Do you think it would be helpful if I chimed in on the GitHub ticket in favor of the time() solution? Your idea for a hook also seems fine, though it's a workaround for what is IMO a general bug in the system.

I don't have a problem with a regularly-scheduled cleanup task, if you think it'd help keep things tidy until there are broader fixes in place.

Do you want to draft an email to Lihua about it?

I just checked Cavalcade and there doesn't appear to be a lag in the job queue at the moment.

It's been close to four days since I purged the trailing waiting jobs. Let's hold off on this until we can accurately determine what is causing the lag. I'm guessing certain jobs that occur on a weekly basis is the cause.

$runner = Runner::instance( [ 'max_workers' => 8 ] );

Yes, this looks correct to me.

At the very least, the runner should be smart enough not to reschedule a recurring task if there are pending (and therefore duplicate) runs that are scheduled before the next time() + interval. Do you think it would be helpful if I chimed in on the GitHub ticket in favor of the time() solution?

On another Github issue, rmccue notes that the current "nextrun + interval" solution is intentional: https://github.com/humanmade/Cavalcade/issues/74#issuecomment-453150620. So feel free to chime in on the ticket as well.

rmccue notes there that the behavior is intentional because "the clock monotonically increases". But our problem is not non-monotonic (ie incorrectly ordered) scheduling, it's that we are ending up with so many tasks that we don't have enough workers to complete them. The tasks that are scheduled are properly consecutive, but they are scheduled in the past (and often multiple times in the past) so that they never catch up.

Am I capturing the issue correctly? I want to be sure I understand it :)

Either way, maybe we can hold off as you continue to gather info.

Am I capturing the issue correctly? I want to be sure I understand it :)

Yes you are. I just wanted to note what rmccue said as Cavalcade's rescheduling logic hasn't changed despite the many reports on Github.

Either way, maybe we can hold off as you continue to gather info.

I just checked the Cavalcade job queue and the lag started again, but it was only lagging by about 15 minutes. Since this started again on a weekly basis, I want to look at removing weekly cron jobs that are not really useful.

The main offender is WP's Site Health cron job. There are currently 8943 scheduled tasks for this job. To me, the Site Health page isn't useful to subdomain administrators since we manage plugin and theme updates via Git, or even to us as network admins since we can query for this type of info anytime. I would like to propose that we remove the Site Health page and its corresponding cron job. What do you think, Boone?

Or if we want to be conservative, we can keep the Site Health page for the main site only. Then, we can remove the majority of tests that the Site Health check runs; I think we could safely remove 95% of them.

To me, the Site Health page isn't useful to subdomain administrators since we manage plugin and theme updates via Git, or even to us as network admins since we can query for this type of info anytime. I would like to propose that we remove the Site Health page and its corresponding cron job. What do you think, Boone?

I'm 100% in favor of removing it altogether. Let's add it to the block list at wp-content/mu-plugins/cavalcade.php and delete pending jobs.

I'll leave a comment on the GitHub thread in favor of fixing this upstream in Cavalcade.

Let's add it to the block list at wp-content/mu-plugins/cavalcade.php and delete pending jobs.

Done in #14299. I've also removed the pending wp_site_health_scheduled_check jobs and cleared Cavalcade's cache.

After the scheduled network maintenance today, there was a backlog of Cavalcade jobs building up. At around 9:30 ET, the backlog was about 10 mins.

So I started removing some jobs that were lagging:

wp db query 'select hook,`interval`,count(*) from wp_cavalcade_jobs where nextrun < utc_timestamp() and status = "waiting" group by hook order by count(*) desc'

I also deployed https://github.com/cuny-academic-commons/cac/commit/19e1d57f35fdb12e0a79bf9eb3bb9286cafcbf00 as a hotfix and purged all wp_https_detection jobs.

Daylight Savings Time ended last week, which created a backlog of around three days for our queued jobs. This is the same thing we talked about here.

Just for my own reference, this is what I did:

• Remove all queued jobs that are recurring (except for the RBE and GES jobs) with the following query:

delete from wp_cavalcade_jobs where status = "waiting" and `schedule` is not null and hook not in ("bp_rbe_schedule","bpges_health_check","cac_table_optimization") and nextrun < utc_timestamp();

• Let the non-recurring jobs finish. If impatient, can delete the "do_pings" jobs.

• The jobs will quickly start rescheduling and accumulating again. Monitor the jobs queue every once in awhile with the following query:

select * from wp_cavalcade_jobs where status = "waiting" and nextrun < utc_timestamp() order by nextrun asc limit 10;

• If there is still a large lag, trim frequent jobs (except RBE and GES) so Cavalcade isn't overwhelmed as needed (adjust 'interval' depending on the queue):

delete from wp_cavalcade_jobs where status = "waiting" and nextrun < utc_timestamp() and `interval` < 3601 and `schedule` is not null and hook not in ("bp_rbe_schedule","bpges_health_check");

• Use Cavalcade's flush query cache method after every deletion query with:

HM\Cavalcade\Plugin\Job::flush_query_cache();